Products FAQ

Why didn't my cartridge print the full amount of pages? Why was the yield lower than what was quoted online?
Customers often worry about the yield of their cartridges. They often mistakenly try to track yield by time. The amount of time it takes for a cartridge to go empty is a bad indicator of yield. The cited yield for ink and toner cartridges is given at 5% coverage. This is usually not a lot of print on a page. Typically only a short memo is at 5% coverage. If you are printing letters, using legal size paper, printing photos, web pages or doing any kind of graphics your coverage will vary greatly. This will cause the yield to drop greatly.

There are two ways to properly check for yield. First is to utilize any page count your printer has. Refer the user's manual for instructions. The other way is to count reams or boxes of paper you have used with each cartridge. Both of these methods will tell you how many pages per cartridge you are using.

Both methods give you a raw number. You should also take into account your typical print coverage. If you only do memos then you should reach the manufacturer's stated yield specifications. If you write full page letters or print graphics your yield will be considerably less.
Introduced in June 2004, the ISO/IEC 19752 standard method for testing page yield was introduced. It created a comprehensive process to test page yields. This standard method means that from now on all printer manufacturers and cartridge manufacturers will be quoting ink and toner cartridge yields using the same testing process. On the right you can see the sample page that is used to test yield. If your documents have more page coverage you will get drastically lower page yields from each inkjet

Why is my new ink cartridge not printing?
This can happen to cartridges with attached print heads such as HP, Lexmark or Dell. All cartridges are weighed and tested before leaving the factory so lack of ink isn't the problem. It usually has to do with the print head of the cartridge not having any ink to feed it. This happens because cartridges are kept flat or upside down for weeks or months before being used and the ink settles away from the print head. The easiest remedy is to open the box and stand the cartridge upright for a few minutes before using. Then get a damp paper towel, fold it into quarters and sit the cartridge print head down onto it. Hold the cartridge down to the damp paper towel for three minutes. This will help pull the ink out of the print heads, priming them and getting them ready to print. Finally, install the cartridge into your printer and print a few test pages.

How can I get dried ink out of my inkjet print head so I can print again?
Place the clogged cartridge in about 1/4 - 1/2 inch of warm water for a few minutes. When ink starts to slowly leak out take the cartridge out of the water and dry it using a soft cloth to "Q-tip." Then place it back in your printer and run the print head cleaning utility that comes with your printer software. You may have to run this 2-4 times before printing quality is reestablished. If your print head is destroyed, as can happen, you will have to buy a cartridges and refill that cartridge before it is fully empty.

Why don't you carry Epson refill kits?
Epson printer incorporate a high quality print head onto their printers instead of disposable print heads on their cartridges. So, due to the sensitivity of the Epson print head we do not endorse or sell refill kits for Epson printers.